Monday, July 12, 2021

Fact Pattern: Leland Manufacturing uses 10 units of Part Number KJ37 each month in the production of radar equipment. The unit cost to manufacture 1 unit of KJ37 is presented below.

Fact Pattern: Leland Manufacturing uses 10 units of Part Number KJ37 each month in the production of radar equipment. The unit cost to manufacture 1 unit of KJ37 is presented below.

Direct materials
$  1,000
Materials handling (20% of direct materials cost)
200
Direct labor
8,000
Manufacturing overhead (150% of direct labor)
12,000
Total manufacturing cost
$21,200

Materials handling represents the direct variable costs of the Receiving Department that are applied to direct materials and purchased components on the basis of their cost. This is a separate charge in addition to manufacturing overhead. Leland’s annual manufacturing overhead budget is one-third variable and two-thirds fixed. Scott Supply, one of Leland’s reliable vendors, has offered to supply Part Number KJ37 at a unit price of $15,000.


Assume that Leland Manufacturing does not wish to commit to a rental agreement but could use idle capacity to manufacture another product that would contribute $52,000 per month. If Leland elects to manufacture KJ37 in order to maintain quality control, Leland’s opportunity cost is


$4,000



Opportunity cost is the maximum alternative earnings that might have been obtained if the productive good, service, or capacity had been applied to some alternative use. The additional total monthly cost of purchasing the component is $48,000. If the idle facilities could be used to produce a product contributing $52,000 per month, the net benefit opportunity cost of manufacture would be $4,000. The $48,000 additional total monthly cost is calculated by subtracting the variable cost of producing KJ37 from the variable cost of purchasing it. The total variable cost of purchasing a unit of KJ37 is $18,000 ($15,000 + $3,000), which includes $3,000 of materials handling cost ($15,000 × 20%). The total variable cost of producing KJ37 of $13,200 per unit ($1,000 + $200 + $8,000 + $4,000), which includes variable manufacturing overhead cost of $4,000 ($12,000 ÷ 3). This gives us an additional cost of $4,800 per unit ($18,000 – $13,200). Since Leland produces 10 units per month, the additional monthly cost of purchasing the units is $48,000 ($4,800 × 10).

Money supply and interest rate

 Money supply and interest rate are inversely related.

Clay Co. has considerable excess manufacturing capacity. A special job order’s cost sheet includes the following applied manufacturing overhead costs:

Clay Co. has considerable excess manufacturing capacity. A special job order’s cost sheet includes the following applied manufacturing overhead costs:

Fixed costs: $21,000
Variable costs: $33,000


The fixed costs include a normal $3,700 allocation for in-house design costs, although no in-house design will be done. Instead, the job will require the use of external designers costing $7,750. What is the total amount to be included in the calculation to determine the minimum acceptable price for the job?

$40,750

Given excess capacity, neither increased fixed costs nor opportunity costs are incurred by accepting the special order. Thus, the marginal cost of the order (the minimum acceptable price) is $40,750 ($33,000 variable costs + $7,750 cost of external design).

Sunday, July 11, 2021

Clifford’s pension fund will pay $40,000 per year for the next 5 years at the end of each year, after which the pension fund balance will be zero. The annual interest rate for the first 3 years is 3%, and the rate for the remaining 2 years is 4%. What is the current pension fund balance?

Clifford’s pension fund will pay $40,000 per year for the next 5 years at the end of each year, after which the pension fund balance will be zero. The annual interest rate for the first 3 years is 3%, and the rate for the remaining 2 years is 4%. What is the current pension fund balance?


Present value of 1 at 3% for 3 years:
0.915
Present value of 1 at 4% for 2 years:
0.925
Period(s)
Present value of an
ordinary annuity at 3%
Present value of an
ordinary annuity at 4%
1
0.97
0.96
2
1.91
1.89
3
2.83
2.78
4
3.72
3.63
5
4.58
4.45


$182,374

The five payments can be separated into two series of equal payments at equal intervals of time occurring at the end of each period (ordinary annuities). One is for 3 years at 3% and the other for 2 years at 4%. For the annuity for 2 years at 4%, the present value at the end of the third year is $75,600 ($40,000 × 1.89). The present value of this annuity currently is $69,174 ($75,600 × 0.915). For the annuity for 3 years at 3%, the present value currently is $113,200 ($40,000 × 2.83). The current pension fund balance therefore is $182,374 ($69,174 + $113,200).

A job-order cost system uses a predetermined factory overhead rate based on expected volume and expected fixed cost. At the end of the year, underapplied overhead might be explained by which of the following situations?

A job-order cost system uses a predetermined factory overhead rate based on expected volume and expected fixed cost. At the end of the year, underapplied overhead might be explained by which of the following situations?



Answer (B) is correct.
If too little fixed overhead is applied at the predetermined rate (expected fixed cost ÷ expected volume), the result is underapplied overhead (actual factory overhead exceeds overhead applied). If the actual and expected fixed costs are the same, but the actual volume is less than the expected (denominator) volume, overhead will be underapplied. If the actual volume equals expected volume but actual fixed costs exceed the expected (numerator) fixed costs, overhead is likewise underapplied.

Fact Pattern: Tidwell Corporation sells a single product for $20 per unit. All sales are on account, with 60% collected in the month of sale and 40% collected in the following month. A partial schedule of cash collections for January through March of the coming year reveals the following receipts for the period:

Fact Pattern:  Tidwell Corporation sells a single product for $20 per unit. All sales are on account, with 60% collected in the month of sale and 40% collected in the following month. A partial schedule of cash collections for January through March of the coming year reveals the following receipts for the period:

Cash Receipts
January
February
March
December receivables
$32,000
From January sales
54,000
$36,000
From February sales
66,000
$44,000

Other information includes the following:

  1. Inventories are maintained at 30% of the following month’s sales.
  2. Tidwell desires to keep a minimum cash balance of $15,000. Total payments in January are expected to be $106,500, which excludes $12,000 of depreciation expense. Any required borrowings are in multiples of $1,000.
  3. The December 31 balance sheet for the preceding year revealed a cash balance of $24,900.


March sales total $150,000. The number of units Tidwell must purchase in February is: 6,100 units


Projected sales for February total $110,000 ($66,000 + $44,000). Unit sales are thus expected to be 5,500 ($110,000 ÷ $20). March unit sales are projected at 7,500 ($150,000 ÷ $20). February purchases can thus be calculated as follows:
Needed for February sales
5,500
Add: 30% of March sales
2,250
Total units needed
7,750
Less: Beginning inventory
(1,650)
February purchases
6,100

IRR

 Select the project with IRR greater than capitalization rate (or discount rate).

Saturday, July 10, 2021

A company uses process costing to assign product costs. Available inventory information for a period is as follows:

A company uses process costing to assign product costs. Available inventory information for a period is as follows:

                            Inventory    Material   Conversion
                            (in Units)     Cost        Cost   
 Beginning                         0
 Started during the period    15,000     $75,000      $55,500
 Transferred out              13,500
 End of period                 1,500



The ending inventory was 25% complete as to the conversion cost. 100% of direct material was added at the beginning of the process. What was the total cost transferred out?

Equivalent unit for material cost = 13,500 + 1,500 = 15,000
Equivalent unit for conversion cost = 13,500 + (1,500 x 25%) = 13,875

Material cost per equivalent unit = 75,000 / 15,000 = $5
Conversion cost per equivalent unit = 55,500 / 13,875 = $4

Total cost transferred out = unit transferred out x (material cost per equivalent unit + conversion cost per equivalent unit) = 13,500 x $9 =  $121,500

Friday, July 9, 2021

M & P Tool has three service departments that support the production area. Outlined below is the estimated overhead by department for the upcoming year:

M & P Tool has three service departments that support the production area. Outlined below is the estimated overhead by department for the upcoming year:

                       Estimated   Number of
 Service Departments    Overhead   Employees
 Receiving              $25,000        2
 Repair                  35,000        2
 Tool                    10,000        1
 
 Production Departments
 Assembly                             25
 Bolting                              12



The Repair Department supports the greatest number of departments, followed by the Tool Department. Overhead cost is allocated to departments based upon the number of employees.

Using the step-down method of allocation, the allocation from the Repair Department to the Tool Department would be:

$875

The allocation would be $875, calculated as follows:

Allocation of Cost from Repair Department to Tool Department:
Employees in Tool Dept. = 1
Cost of Repair Dept. = $35,000
Total Non-repair Employees Excluding Rep. Dept. = 40


Allocation = Cost × (Tool employees/Sum of all non-repair employees)
= $35,000 × (1/(2 + 1 + 25 + 12))
= $35,000 × (1/40)
= $875

G-Mark manufactures backpacks. The total of incurred fixed costs during July was $5,910. For the same month, budgeted costs that are fixed per backpack were $13.40. Additional July information is as follows:

G-Mark manufactures backpacks. The total of incurred fixed costs during July was $5,910. For the same month, budgeted costs that are fixed per backpack were $13.40. Additional July information is as follows:

                                    Unit            Unit   
                   Unit Sales   Selling Price   Variable Cost
 Actual amounts       420           $42              $25
 Budgeted amounts     435           $44              $27


How much is net operating income on G-Mark’s flexible budget for July?

$1,311


The flexible budget is based on the actual units sold and the budgeted selling price and costs. Fixed costs based on the original static budget are estimated at $5,829 (435 units × $13.40) and are the same in total at every level of activity.

 Sales revenue (420 units × $44)    $18,480
 Variable costs (420 units × $27)    11,340
 Contribution margin                $ 7,140
 Fixed costs (435 units × $13.40)     5,829
 Net operating income               $ 1,311

Thursday, July 8, 2021

Wilson, Inc. needs to obtain funds in order to satisfy a product liability suit that was initiated 2 years earlier by a customer. First Bank has offered a 4.5%, 1-year loan with a face amount of $45,000. The loan requires a 0.5% interest-bearing compensating balance in the amount of $10,000. What is the effective annual interest rate for the loan?

Wilson, Inc. needs to obtain funds in order to satisfy a product liability suit that was initiated 2 years earlier by a customer. First Bank has offered a 4.5%, 1-year loan with a face amount of $45,000. The loan requires a 0.5% interest-bearing compensating balance in the amount of $10,000. What is the effective annual interest rate for the loan?

5.79%


Compensating balances are amounts required to be kept in an account by a bank and are often mandatory in order to obtain a loan or to avoid paying fees for individual bank services. The effective annual interest rate is the investment’s annual rate of interest when compounding occurs more often than once a year. The effective interest rate is computed by dividing the annual rate of interest by the usable funds available to the borrower. The effective annual interest rate is interest divided by usable funds:

(4.5% × $45,000) ÷ [$45,000 − $10,000 – (0.5% × $10,000)] = 5.79%

Wednesday, July 7, 2021

The following selected data pertain to a 4-year project being considered by Metro Industries:

The following selected data pertain to a 4-year project being considered by Metro Industries:

  • A depreciable asset that costs $1,200,000 will be acquired on January 1, 20X1. The asset, which is expected to have a $200,000 salvage value at the end of four years, qualifies as 3-year property under the modified accelerated cost recovery system (MACRS).
  • The new asset will replace an existing asset that has a tax basis of $150,000 and can be sold January 1, 20X1, for $180,000.
  • The project is expected to provide added annual sales of 30,000 units at $20 each. Additional cash operating costs are variable, $12 per unit; fixed, $90,000 per year.
  • A $50,000 working capital investment that is fully recoverable at the end of the fourth year is required.
Metro is subject to a 40% income tax rate and rounds all computations to the nearest dollar. Assume that any gain or loss affects the taxes paid at the end of the year in which it occurred. The company uses the net present value method to analyze investments and will employ the following factors and rates.

              Present Value     Present Value of       MACRS
  Period      of $1 at 12%      $1 Annuity at 12%      Rate 
    1            0.8929              0.8929            .33
    2            0.7972              1.6901            .45
    3            0.7118              2.4018            .15
    4            0.6355              3.0373            .07

The discounted cash flow for 20X4 MACRS depreciation on the new asset is:


The discounted cash flow is $21,353, calculated as follows:

= $1,200,000 x .07 x .40 x .6355
= $21,353

Saturday, July 3, 2021

Three suppliers offer Ruby Co. different credit terms. Bandy Co. offers terms of 1.5/15, net 30. Carryl Co. offers terms of 1/10, net 30. Platt Co. offers terms of 2/10, net 60. Ruby Co. would have to borrow from a bank at an annual rate of 10% to take any cash discounts. Based on a 360-day year, which of the following options would be most attractive for Ruby Co.?

Three suppliers offer Ruby Co. different credit terms. Bandy Co. offers terms of 1.5/15, net 30. Carryl Co. offers terms of 1/10, net 30. Platt Co. offers terms of 2/10, net 60. Ruby Co. would have to borrow from a bank at an annual rate of 10% to take any cash discounts. Based on a 360-day year, which of the following options would be most attractive for Ruby Co.?

Best choice: purchase from Bandy Co., pay in 15 days, and borrow from the bank.

    Annual interest rate (Bandy Co.)
=
[1.5% ÷ (100% – 1.5%)] × [360 days ÷ (30 days – 15 days)]
=
(1.5% ÷ 98.5%) × (360 days ÷ 15 days)
=
1.5% × 24.3
=
36.5%
Annual interest rate (Carryl Co.)
=
[1% ÷ (100% – 1%)] × [360 days ÷ (30 days – 10 days)]
=
(1% ÷ 99%) × 18
=
1.01% × 18
=
18%

Annual interest rate (Platt Co.)
=
[2% ÷ (100% – 2%)] × [360 days ÷ (60 days – 10 days)]
=
(2% ÷ 98%) × 7.2
=
2.04% × 7.2
=
15%
By using this equation, Ruby’s benefits from (cost of not taking) discounts offered by Bandy, Carryl, and Platt are 36.5%, 18%, and 15%, respectively. Thus, the benefit from taking Bandy’s discount is 26.5% (36.5% – 10%), and it is the highest from the options provided.

A company plans to sell 12,000 units of product XT and 8,000 units of product RP. The company has a capacity of 12,000 productive machine hours. The unit cost structure and machine hours required for each product are as follows:

A company plans to sell 12,000 units of product XT and 8,000 units of product RP. The company has a capacity of 12,000 productive machine hours. The unit cost structure and machine hours required for each product are as follows:

Unit costs:
XT
RP
Materials
$37
$24
Direct labor
12
13
Variable overhead
6
3
Fixed overhead
37
38
Machine hours required
1.0
1.5

The company can purchase 12,000 units of XT at $60 and/or 8,000 units of RP at $45. Based on the above, which one of the following actions should be recommended to the company’s management?



Answer: produce XT internally and purchase RP.


Relevant unit cost to product XT is $55 ($37 + $12 + $6) and cost for RP is $40 ($24 + $13 + $3). Only enough machine hours are available to produce one product or the other (XT: 12,000 × 1.0 hour per unit = 12,000 hours, RP: 8,000 units × 1.5 hours per unit = 12,000 hours). Cost to produce XT in-house would be $660,000 (12,000 × $55) and cost to produce RP would be $320,000 (8,000 × $40). Cost to purchase XT from outside would be $720,000 (12,000 × $60) and cost to purchase RP would be $360,000 (8,000 × $45). The possible combination with the lowest cost is to produce XT and purchase RP ($660,000 + $360,000 = $1,020,000).