Sunday, June 30, 2019

The relationship between control risk, inherent risk and detection risk

Control risk is the risk that a material misstatement that could occur in an assertion will not be prevented or detected on a timely basis by an entity's internal control. Detection risk is the risk that the auditor will not detect a material misstatement that exists in an assertion. Detection risk should bear an inverse relationship to inherent and control risk. The less the inherent and control risk the CPA believes exists, the greater the detection risk the CPA can accept.

How do the scope, procedures, and objective of an engagement to audit the design and operating effec­tiveness of an entity’s internal control over financial reporting compare to those for obtaining an under­standing of internal control and assessing control risk as part of an audit?

Obtaining an understanding of an entity’s controls is not sufficient to test their operating effectiveness, unless some automation provides for the consistent operation of the controls. Obtaining audit evidence about the implementation of a manual control at a point in time does not provide audit evidence about the operating effectiveness of the control at other times during the period.

Testing the operating effectiveness of a control means determining if the control is operating as designed and whether the person performing the control possesses the necessary authority and competence to perform the control effectively.

Therefore, the design and operating effectiveness of an entity’s internal control over financial reporting compared to obtaining an understanding of internal control and assessing control risk as part of an audit have similar procedures; however, they have different scopes and very different objectives.

What is considered to be a general control related to information technology applied in internal control over financial reporting?

Examples of general controls are program change controls, controls that restrict access to programs or data, controls over the implementation of new releases of packaged software applications, and controls over system software that restrict access to or monitor the use of system utilities that could change financial data or records without leaving an audit trail. The other controls listed (data integrity checks, comparison of databases for anomalies, and upper-limit ranges for data input) are application controls.

Which of the following procedures would an accountant least likely perform during an engagement to review the financial statements of a nonpublic entity?

A review of financial statements of a nonpublic entity is considerably smaller in scope than an audit. The accountant performing a review obtains a reasonable basis for expressing limited assurance that there are no modifications that should be made to the financial statements for the statements to be in conformity with GAAP. Review procedures are limited to:

analytical procedures, such as:
  • comparing the financial statements with anticipated results in budgets and forecasts, or
  • studying the relationship of financial statement elements expected to conform to predictable patterns. 
  • inquiry, such as inquiring of management about actions taken at the board of directors' meetings. 

The review specifically relieves the accountant from obtaining an understanding of the entity's internal control, including the safeguards over access to and use of assets and records.

In the integrated audit of an issuer, what would not be considered an entity-level control?

An integrated audit is an audit of internal control over financial reporting being integrated with the audit of the financial statements. The auditor must test entity-level controls that are important to the conclusion about whether the company has effective internal controls over financial reporting. Such entity-level controls include:
  • controls related to the control environment,
  • controls over management override,
  • the company’s risk assessment process,
  • centralized processing and controls,
  • controls to monitor the results of operations,
  • controls to monitor other controls, including activities of the internal audit function, the audit committee, and self-assessment programs,
  • controls over period-end financial statements, and
  • policies that address significant business control and risk management practices.

The outside auditor’s assessment process of internal auditor competence and objectivity is not among these entity-level controls.

What control should prevent an invoice for the purchase of merchandise from being paid twice?

When the check signer reviews and cancels the voucher packets, the cancellation prevents the packets from being processed again for payment. The other answer choices are incorrect because receiving reports, bank reconciliations, and the requirement for dual signatures on large checks do not prevent duplicate payment of a voucher packet.

What components of internal control contributes most to a strong control environment?

Internal control consists of five interrelated components: (1) control environment, (2) risk assessment, (3) information and communication, (4) control activities, and (5) monitoring. The control environment sets the tone of an organization, influencing the control consciousness of its people. It is the foundation for all other components of internal control, providing discipline and structure.

The internal control that contributes the most to a strong control environment is the attitude, awareness, and actions of those charged with governance, particularly management.
They set the “tone at the top,” which has a trickle-down effect to all levels of employees in terms of establishing and maintaining a strong internal control environment.

What indicate that the auditor has gained a sufficient understanding of a client's internal controls related to the sales order process?

Performing a walkthrough may be the most effective way to gain a sufficient understanding of internal controls. During a walkthrough, the auditor questions the company's personnel about their understanding of what is required by the company's prescribed procedures and controls. These probing questions allow the auditor to gain a sufficient understanding of the process and to be able to identify important points at which a necessary control has been implemented, is working, is missing, or is not designed effectively.

Documenting that the sales order system prints a shipment-exception report listing non-invoiced shipments is an indication that the auditor has gained a sufficient understanding of the controls over the sales order process to be able to identify key control points and techniques.

What's auditor's obligation to identify deficiencies in the design or operation of internal control?

The auditor is required to obtain an understanding of the five components of internal control sufficient to assess the risk of material misstatement of the financial statements whether due to error or fraud, and to design the nature, timing, and extent of further audit procedures. The auditor should obtain a sufficient understanding by performing risk assessment procedures to evaluate the design of controls relevant to an audit of financial statements and to determine whether they have been implemented.

This understanding is necessary in order to:
  • identify types of potential misstatements and
  • consider factors that affect the risk of material misstatement.

It will also be useful to the auditor later when designing tests of controls and substantive procedures.

The auditor then will evaluate the operating effectiveness of the internal controls in order to assess control risk, which should be documented in the audit workpapers.

Through this process, the auditor may discover significant deficiencies in the design or operation of the internal controls that may impair the entity's ability to initiate, record, process, and report financial data. Should the auditor become aware of significant deficiencies, they should be communicated to management and those charged with governance in writing.

An auditor is not required to perform procedures to identify deficiencies in internal control, and the auditor is precluded from stating that no significant deficiencies were identified during the audit.

What test an auditor most likely would test for the presence of unauthorized EDP program changes?

A source code comparison program compares the coding of the program from its last run with the original program, testing for any unauthorized changes in the program.

An auditor anticipates assessing control risk at a low level in a computerized environment. Under these circumstances, on which of the following procedures would the auditor initially focus?

General IT controls are policies and procedures that relate to different applications and support the effective functions of application controls. In order to assess control risk at a low level would mean there is an effective functioning of application controls, and thus the auditor would initially focus on the general controls.

Saturday, June 29, 2019

Best route driving across America


The picture is too small, can't see the exact location of each stopping point.  If I decide to drive across country someday, I will find out the exact locations of each stopping point.

A service auditor's report

A service auditor's report expressing an opinion on a description of controls placed in operation at a service organization should contain a description of the scope and nature of the service auditor's procedures.

Reminder: A service auditor is the auditor who reports on the processing of transactions by a service organization.

Benefits of using electronic funds transfer for international cash transactions?

IT provides potential benefits in an entity’s internal control by enabling an entity to:
  • consistently apply predefined business rules and perform complex calculations in processing large volumes of transactions,
  • enhance timeliness, availability, and accuracy of information,
  • facilitate additional analysis of information,
  • enhance the ability to monitor performance of policies and procedures,
  • reduce the risk of controls being circumvented, and
  • enhance the ability to achieve effective segregation of duties. 
The reduction of the frequency of data entries is a benefit similar to enhancing the accuracy of information.

The true using information technology in internal control over financial reporting over manual controls?

Authorization procedures in many computer systems are a part of the computer program. Thus, there is increased potential for unauthorized individuals to gain access to sensitive accounting information. Concerning the maintenance of adequate documentary evidence, auditors must be aware that the traditional audit trail may not be available due to the fact that the IT system does not provide a hard copy of source documents. Adequate controls must be established within the IT department to compensate for the lack of segregation of duties that would normally be available in a manual system. It is also important to have adequate backup for computer files, as the loss of data/information could have broader business implications in an automated environment versus a manual one.

If an auditor is obtaining an understanding of an issuer's information and communication component of internal control, which of the following factors should the auditor assess?

Internal controls consist of five interrelated components: control environment, risk assessment, information and communication, control activities, and monitoring.

Information and communication systems support the identification, capture, and exchange of information and consist of the procedures and records relevant to financial reporting objectives (including the accounting system). As such, the auditor should obtain sufficient knowledge of the information system to understand the following:

  • Significant classes of transactions in the entity’s operations
  • Manual and automated procedures by which transactions are initiated, authorized, recorded, processed, and reported in the financial statements 
  • The related accounting records supporting information, and specific accounts in the financial statements involved in initiating, authorizing, recording, processing, and reporting transactions 
  • The financial reporting process used to prepare the entity’s financial statements, including significant accounting estimates and disclosures 
  • Controls surrounding journal entries 

Assessing management’s integrity, ethical values, philosophy, and operating style are related to the control environment component, not information and communication.

Friday, June 28, 2019

Components of Internal Control

The components of internal control consist of the following:
  • Control environment
  • The entity’s risk assessment process
  • The information system, including related business processes relevant to financial reporting and communication
  • Control activities relevant to the audit
  • Monitoring of control

Internal control is a process, effected by an entity's board of directors, management, and other personnel, designed to provide reasonable assurance regarding the achievement of objectives in all of the following categories, except:

The following categories are reflected in the definition of internal control:
  • Reliability of financial reporting
  • Effectiveness and efficiency of operations
  • Compliance with applicable laws and regulations 
Segregation of functional responsibilities is a basic concept of internal control, but not a primary objective as provided in the definition.

What is not a major reason for maintaining an audit trail for a computer system?

An audit trail in a computer system, as in a manual system, assists in discovering fraud and therefore acts as a deterrent to perpetration of such acts.

Other major reasons for an audit trail include:

  • monitoring the system and the data produced, and
  • answering queries by tracking a specific transaction through the accounting records or tracing a transaction back to the original source and observing how it is processed through the system.
Analytical purposes are not a major factor for maintaining an audit trail in a computer system. Analytical review can be performed by retrieving recorded data stored in the computer system or on hard copy.

What element should the auditor NOT consider in evaluating the entity's control environment?

The control environment involves those factors that set the tone for the entire entity. In evaluating the entity's control environment, the auditor should consider the following elements and how they have been incorporated into the entity's processes:
  • Communication and enforcement of integrity and ethical values
  • Commitment to competence
  • Participation of those charged with governance
  • Management's philosophy and operating style
  • Organizational structure
  • Assignment of authority and responsibility
  • Human resource policies and practices 
Measurements and review of the entity's financial performance would be classified as control activities.

What factors would least likely affect the extent of the auditor's consideration of the client's internal controls?

In assessing the risk of material misstatement, the auditor must gain an understanding of the entity and its environment overall, which includes the:

  • industry, regulatory, and other external factors,
  • nature of the entity (size and complexity of the client),
  • objectives and strategies and related business risks,
  • measurement and review of the entity's financial performance, and
  • internal control.
The auditor examines the five interrelated components of internal control:

  • Control environment
  • Entity's risk assessment
  • Information and communication systems
  • Control activities (the nature of specific relevant controls)
  • Monitoring

The auditor would also take into account prior experience with client operations to guide current-year assessments of risk.

The amount of time budgeted to complete the engagement should have no bearing on the consideration of the client's internal controls.

Thursday, June 27, 2019

Which of the following procedures concerning accounts receivable would an auditor most likely perform to obtain audit evidence in support of an assessed level of control risk below the maximum level?

Observing an entity's employee prepare the schedule of past due accounts receivable is a test of controls that would help an auditor in assessing the level of control risk. The other three audit procedures (below) are all substantive tests that would be performed to properly value accounts receivable on the balance sheet; they do not test aspects of internal control and would not help the auditor in assessing control risk.
  • Sending confirmation requests to an entity's principal customers to verify the existence of accounts receivable 
  • Inspecting an entity's analysis of accounts receivable for unusual balances 
  • Comparing an entity's uncollectible accounts expense to actual uncollectible accounts receivable

Parallel simulation

Parallel simulation is when the auditor uses client data and auditor-controlled software to obtain output. The auditor's output is compared to the output from the client. Differences indicate potential weaknesses or problems with the client's software.

Other computer-assisted auditing techniques: 
  • Test data is introduced into the client's computer system using the same program to operate the application being tested. This type of control testing is not under the auditor's control, as it uses the client's actual program.
  • A review of program logic would not assist the auditor with testing the operating controls of the computer system. It may, however, provide information about the design of the automated controls.
  • An integrated test facility introduces a fictitious entity (such as a fake employee or customer) with real entries in the master files of the client's computer system. The auditor then compares the processing of data through the fictitious entity with what should be there in order to test that the data processing is reliable. Like the test data (or test deck) approach, an integrated test facility uses the client's system and is not under the auditor's control.

Service auditor's report

A service organization is an external entity that provides services (such as processing payroll) to user entities that are relevant to those user entities’ internal control over financial reporting. When a user entity uses a service organization, transactions that affect the user entity’s financial statements are subjected to controls that are, at least in part, physically and operationally separate from the user organization. Auditing and examination standards require the accountant to obtain an understanding of the components of an entity’s internal controls. The user auditor can use reports prepared by service auditors, internal auditors, or regulatory authorities on the service organization’s controls, including the service auditor's report (as audit evident) on internal controls placed in operation.

The objectives of the internal control for a production cycle are to provide assurance that transactions are properly executed and recorded, and that:

The production cycle is the period in which raw products and materials remain in the production process, from the beginning of manufacturing through the output of a finished product.

Since the production cycle handles raw products and materials, it is important to maintain proper custody of the assets, as assets can easily be misappropriated during this cycle.

Control activities

The following control activities are policies and procedures that help ensure that management directives are carried out and necessary actions are taken to address risk that threaten achievement of the entity’s objectives:

  • Authorization
  • Segregation of duties
  • Safeguarding/physical controls
  • Asset accountability/information processing
  • Performance reviews

As a result, the auditor would be most interested in asking questions for notes payable that met one of the above control activities. Of the answer choices given, the authorization of direct borrowings by the board of directors would best meet those objectives.

What financial statement line items is typically most susceptible to management override of internal controls that could result in material misstatement in the financial statements?

Management override of controls can occur in unpredictable ways. Due to this fact, the auditor should perform procedures (in addition to the procedures already performed to address identified risks of material misstatements due to fraud) that include the following: examining journal entries and other adjustments for evidence of possible material misstatement due to fraud; reviewing accounting estimates (such as the allowance for doubtful accounts) for biases that could result in material misstatement due to fraud; and evaluating the business rationale for significant unusual transactions. Account balances that are supported by external invoices, such as rent, workers’ compensation expense, and telephone expense, are not typically susceptible to management override as they can be independently verified.



Primary risk that goes along with using information technology (IT) in internal controls over financial reporting

Risk assessment requires the inclusion of a strict policy of control over changes in programs and inappropriate access to data. The greatest risks in an IT environment are that the programs that process the data will be altered to generate fraudulent results or data will be manipulated by unauthorized data entry.

Weakness in internal control for payroll

Strong internal controls lower the risk of material misstatement. In the payroll department, the auditor would be looking for controls such as:

  • a payroll imprest system (the accounting department wires funds to the bank account, the amount of which is based on totals from the payroll department summary), 
  • separation of duties for payroll preparation (payroll process is supervised by the treasurer or the CFO signs the checks that the payroll department has prepared), 
  • separation of duties for distribution of checks, and 
  • special control procedures for unclaimed checks. 

If the payroll clerk distributes signed payroll checks that the payroll clerk has prepared, there is no separation of duties. This procedure allows an opportunity for the clerk to prepare a check for someone who is not an employee or to keep an extra check for himself. Returning the undistributed checks to the payroll department also provides an opportunity for misappropriation of those payroll checks. Undistributed checks should be held and investigated by someone outside the payroll department.

Factors related to control activities impact an auditor's consideration of the effect of IT on internal control

Resolution of deficiencies is important in assessing the controls environment, but does not pertain specifically to information technology.

The following factors related to control activities impact an auditor's consideration of the effect of IT on internal control: 

Information processing: Two areas in which control activities can be affected by computer processing are authorization of transactions and the maintenance of adequate documents and records. Authorization procedures in many computer systems are a part of the computer program. Thus, there is increased potential for unauthorized individuals to gain access to sensitive accounting information. Concerning the maintenance of adequate documentary evidence, auditors must be aware that the traditional audit trail may not be available due to the fact that the IT system does not provide a hard copy of source documents. 

Segregation of duties: Adequate controls must be established within the IT department to compensate for the lack of segregation of duties that would normally be available in a manual system. 

Physical controls: In an IT department, access to assets is often possible through the computer system. As such, the need for enhanced physical controls is of great importance in an IT environment. It is also important to have adequate backup for computer files, as their destruction or damage could result in significant problems for a business entity.

Application Controls vs General Controls

Application controls are classified as follows: 
  • Input controls
  • Processing controls
  • Output controls 
Program (or process) change controls would be classified as general controls.

Inherent limitation

Internal control, even if well designed and operated, can only provide reasonable (not absolute) assurance about achieving objectives. Limitations include that human judgment can be faulty and that human errors or mistakes can cause breakdowns in internal controls. Controls can also be circumvented by management override or by collusion (two or more people working together).

Risk assessment

An entity’s risk assessment process for financial reporting purposes is its identification, analysis, and management of risks relevant to the preparation of financial statements that are fairly presented in conformity with the entity’s applicable reporting framework.

Access Controls

Access controls are designed to limit the use of the system and the entry to files of authorized persons. To test that online access controls are properly functioning, the auditor would enter invalid identification numbers or passwords to ascertain whether the system rejects them, thereby denying access.

Check Digit Vertification

A check digit is a specific type of input control, consisting of a single digit at the end of an identification code that is computed from the other digits in a field. If the identification code is mis-keyed, a formula or algorithm will reveal that the check digit is not correct, and the field will not accept the entry.

Example: A customer intended to order 100 units of product Z96014, but incorrectly ordered nonexistent product Z96015.

In this situation, the difference is one digit at the end of an identification code (4 versus 5). Based on the algorithm or formula involved, the check digit verification process would have detected this error.

Definition of Internal Control

Internal control is a process—effected by those charged with governance, management, and other personnel—designed to provide reasonable assurance about the achievement of the entity’s objectives with regard to reliability of financial reporting, effectiveness and efficiency of operations, and compliance with applicable laws and regulations.

Wednesday, June 26, 2019

Debit memo

The debit memo is usually a notification from a buyer to a seller that tells the seller that a debit was made in the seller’s account on the buyer’s book. In other words, a debit memo is a way for a buyer to inform a seller that it wants a refund on its purchase. In the instance when nonconforming goods are returned to a vendor, the purchasing department should prepare a debit memo to be sent to seller with a copy sent to accounting in order for accounting to remove the resulting payable from the accounting records.

Application controls (part 2)

Application controls can be performed by IT (automated) or by individuals (user control). When application controls are performed by people interacting with IT, they may be referred to as user controls.

Application controls (part 1)

Application controls relate to the use of information technology (IT) to initiate, authorize, record, process, and report transactions or other financial data. These controls help ensure that transactions occurred, are authorized, and are completely and accurately recorded and processed. Examples include edit checks of input data (such as an upper-limit test to ensure that the hourly rate is reasonable), numerical sequence checks, and manual follow-up of exception reports. Application controls can be performed by IT (automated) or by individuals. When application controls are performed by people interacting with IT, they may be referred to as user controls.

What auditor can do to detect material misstatement due to Management override (fraud)?

Management override of controls can occur in unpredictable ways. Due to this fact, the auditor should perform procedures (in addition to the procedures already performed to address identified risks of material misstatements due to fraud) that include:

  • examining journal entries and other adjustments for evidence of possible material misstatement due to fraud,
  • reviewing accounting estimates for biases that could result in material misstatement due to fraud, and
  • evaluating the business rationale for significant unusual transactions.

Auditor least likely use test data to test controls concerning?

Test data is introduced into the client's computer system and processed with the client's software in order to determine if specified controls are operating effectively. When using test data, the auditor is looking for controls that are built into the system, not controls that operate outside of the computer. Thus, the auditor would not be testing controls concerning control over and distribution of unclaimed paychecks.

In what situation management philosophy and operating style most likely would have a significant influence on an entity's control environment?

The most significant influence on an entity's control environment by management philosophy and operating style would occur when management is dominated by one individual who is able to exert such influence on the control environment. A primary objective of many internal audit functions is to review, assess, and monitor internal controls. When an internal auditor reports directly to management, this review, assessment, and monitoring may be influenced, but that does not necessarily affect an entity's control environment as much as certain other situations may. Accurate management job descriptions that delineate specific duties would tend to mitigate the effect of management philosophy and operating style on the control environment as would having an audit committee that actively oversees the financial reporting process.

What activity is like to detect whether payroll data was altered during processing?

When trying to detect whether data was altered, the auditor needs to test the computer system. By using test data to verify the performance of edit routines, the auditor will be able to determine if the data was edited.

Sound internal control procedures dictate that defective merchandise returned by customers should be presented initially to the?

One of the key control activities is to ensure proper segregation of duties. An accounts receivable supervisor would have both physical control of the asset and control over information processing. The shipping department supervisor would have control of the physical asset and the information processing. The sales clerk would have the physical control of the asset and the authorization function.

The receiving clerk would not have any other control activity, thus having a proper segregation of duties.

What are inherent limiation of an internet control?

Internal controls have certain inherent limitations. These are:
  • Human errors due to misunderstanding of instructions, mistake of judgment, carelessness, distractions, or fatigue,
  • Collusion which circumvents the segregation of duties,
  • Management override that may override the structure to commit fraud or misstate the financial statements, and
  • Changing conditions that may weaken a system which was adequate before the change. 
Inherent limitations means that, no matter how well designed and operated, internal controls cannot provide absolute assurance that an entity can achieve its financial, operational, and compliance objectives.

The other choices (a complex information processing system, an ineffective board of directors, and the lack of management's desire to improve the internal controls) describe situations where the auditor would conclude that the audit has a higher inherent risk due to the nature of the entity and its environment.

Proper authorization of write-offs of uncollectible accounts should be approved in which of the following departments?

A system that would be most effective in authorizing write-offs of uncollectible accounts would remove the ability for accounts receivable or credit to authorize such transactions. By having accounts receivable authorize such transactions, money could be received on account, the account written off as uncollectible, and money kept by the employee responsible for such. The same could be said for the credit department, as they could grant credit to the customer receipt in return for keeping the payment of an account receivable.

Specific control activities that help ensure management directives are carried out and necessary actions are taken to address risks that threaten the achievement of management directives include the following:

  • Authorization
  • Segregation of duties
  • Safeguarding or physical controls
  • Asset accountability or information processing
  • Performance reviews

The proper authorization of write-offs of uncollectible accounts would be an example of asset accountability and authorization, and this is completed in the treasurer's department.

Electronic Data Interchange (EDI) System

IT poses specific risks to an entity’s internal control, including the following:
  • Reliance on systems or programs that are inaccurately processing data, processing inaccurate data, or both
  • Unauthorized access to data, including the recording of unauthorized or nonexistent transaction or inaccurate recording of transactions
  • Possibility of IT personnel gaining access privileges beyond those necessary to perform assigned duties
  • Unauthorized changes to data in master file
  • Unauthorized changes to systems or programs
  • Failure to make necessary changes to systems
  • Inappropriate manual intervention
  • Potential loss of data or inability to access data (computer disruptions)
Encryption performed by physically secure hardware devices is more secure than encryption performed by software, and helps prevent unauthorized access to data and the possibility of IT personnel gaining access privileges.

To what degree is the auditor required to understand the design and implementation of internal control over financial reporting?

The auditor should obtain an understanding of the five components of internal control sufficient to assess the risk of material misstatement of the financial statements whether due to error or fraud, and to design the nature, timing, and extent of further audit procedures.

What is general control?

Input controls, processing controls, and output controls are all examples of application controls.

Examples of general controls are program change controls, controls that restrict access to programs or data, controls over the implementation of new releases of packaged software applications, and controls over system software that restrict access to or monitor the use of system utilities that could change financial data or records without leaving an audit trail.

What's a Type 2 report?

A Type 2 report (report on management’s description of a service organization’s system and the suitability of the design and operating effectiveness of controls) is a service auditor’s report on whether controls were suitably designed to achieve specified control objectives, on whether they had been placed in operation as of a specific date, and on whether the controls that were tested were operating with sufficient effectiveness to provide reasonable, but not absolute, assurance that the related control objectives were achieved during the period specified.

How to evaluate the effectiveness of design of a internal control?

Obtaining an understanding of internal control involves evaluating the design of a control and determining whether it has been implemented. Evaluating the design of a control involves considering whether the control, individually or in combination with other controls, is capable of effectively (1) preventing or (2) detecting and (3) correcting material misstatements. The auditor should consider the design of a control in determining whether to consider its implementation. An improperly designed control may represent a material weakness in the entity’s internal control, and the auditor should consider whether to communicate this to those charged with governance and management

What it means by implementation of internal control?

Obtaining an understanding of internal control involves evaluating the design of a control and determining whether it has been implemented. Implementation of a control means that the control exists and that the entity is using it.

Tuesday, June 25, 2019

What is NOT a limitation of internal control?

Internal control, no matter how well designed, can only provide reasonable (not absolute) assurance about achieving an entity's objectives. Inherent limitations such as faulty human judgment and simple errors and mistakes can affect the success of internal control. Collusion among employees or management override can circumvent even the best controls. The entity may also decide that a control is too costly to implement.

A smaller entity has fewer employees. Often it is not possible to have proper segregation of duties in a small entity. However, limitations imposed by the small size of an entity can usually be overcome through management reviews

In an audit of financial statements in accordance with generally accepted auditing standards, an auditor is required to?

AU-C 315.33 requires the auditor to document his or her understanding of the entity's internal control obtained to plan the audit. The auditor's documentation must be more extensive when an entity's internal controls are more complex.

The auditor is not required to search for significant deficiencies in the operation of internal control. However, if a material weakness or significant deficiency is discovered by the auditor (a significant deficiency is a deficiency, or a combination of deficiencies, in internal control that is less severe than a material weakness), it should be communicated, in writing, to management and those charged with governance.

Tests of controls are necessary when the auditor is relying on the operating effectiveness of controls or when substantive procedures alone do not provide sufficient appropriate audit evidence at the relevant assertion level. There is no requirement that the auditor evaluate the effectiveness of the entity's accounting system.

In order to assess control risk, which is the risk that a material misstatement that could occur in an assertion will not be prevented or detected on a timely basis by the entity's internal control, the auditor must evaluate the operating effectiveness of the entity's internal controls. Understanding the design of the internal control is not sufficient to assess control risk.

What management control method can improve management's ability to supervise company activities effectively?

The problem asks which management control method could most likely improve management's ability to supervise company activities effectively. This goal requires a control technique that communicates and monitors management's expectations regarding all of the company's activities.

Monitoring compliance with internal controls imposed by regulatory bodies could improve the effectiveness in that particular area but it would not enhance management's ability to supervise the company's activities. Limiting direct access to assets would improve control over assets but this also would not improve management's ability to supervise the company's activities. Supporting employees with necessary resources would certainly aid in the accomplishment of company activities but would do nothing to help management's ability to supervise those activities. Of all the answers provided, using budgets and forecasts and monitoring variances from them is the only management control method that could most likely improve management's ability to supervise company activities effectively

In order to assess risk of material misstatement and design the detailed audit plan, what auditor need to evaluate?

The auditor should obtain an understanding of the five components of internal control sufficient to assess the risk of material misstatement of the financial statements whether due to error or fraud, and to design the nature, timing, and extent of further audit procedures.

The auditor obtains this understanding by performing risk assessment procedures to evaluate the (1) design of controls relevant to an audit of financial statements and (2) determine whether they have been implemented. Operating effectiveness is only required to be assessed if a control reliance strategy is elected or required in the audit.


Parallel simulation

The use of parallel simulation requires the auditor to use a computer simulation that mimics the client's production programs. The auditor processes actual client data through the simulated program and compares the results with the client' processed data.

Study Note - Why auditor need to obtain an understanding of the design of the entity's internal control

The auditor must first obtain an understanding of the design of the entity's internal controls (the five components of internal control) and then determine if the controls have been placed in operation in order to plan the audit. The preliminary understanding is that which the question addresses.

This understanding is necessary in order to:

-identify types of potential misstatements,
-consider factors that affect the risk of material misstatement, and
-design the nature, timing, and extent of further audit procedures.


It will also be useful to the auditor later when designing tests of controls and substantive tests.

The auditor then will evaluate the operating effectiveness of the internal controls in order to assess control risk, which should be documented in the audit workpapers.

Assessing the operating efficiency (effectiveness) of internal control is a different step from understanding the design of the controls. Determining whether the controls have been circumvented by collusion is not an audit step; although testing of controls is necessary in order to assess the level of control risk and then determine the nature, timing, and extent of substantive tests. Documenting the assessed level of control risk comes after the evaluation of the operating effectiveness of the controls.

Study Note

-No need to make inquiry of predecessor auditor regarding pending litigation

Thursday, June 20, 2019

Study Note

-Integrated test facility allows fictitious and real transactions to be processed together without client operating being aware of the testing process

-The suitability of the client's line of reporting (planned, executed, controlled and review) is a factor when an auditor considers the client's organizational structure in the context of control risk.

Wednesday, June 19, 2019

Study Note

-Attestation Services include compilation (provide no assurance), review and audit

Tuesday, June 18, 2019

Study Note

-Ineffective general control by themselves 1) never cause misstatement 2) could allow misstatement.

Food processing stocks

LUCC (Luca Inc.)
SHMP (NaturalShimp Inc.)

Friday, June 14, 2019

Notes (Continued)

-If the auditor perform substantive test at an interim date, he/she should perform further substantive test for the remaining period (the balance sheet date)

-For auditors, the working trial balance would not be included in the permanent file.

-In designing an audit plan, an auditor should establish specific audit objectives that relate primary to financial statement assertions.

-Audit risk

-Planning is an ongoing activity occurs throughout the audit process

-The audit planning includes "NET", and other audit procedure to be performed to comply with GAAS, other elements are factors affects the decision to continue the audit engagement.

-Testing internal controls, inquiring about future transactions, and making comparisons are not compilation procedures.

-Auditors review client's accounting policies and procedures to understanding client's operations and business

-In an engagement to review financial statements, account receivable balance is evaluated by perform a reasonableness test (such as ratio test).

-To understand a business. external factor: interest rate and availability of financing; internal factor: nature of revenue sources, geographic dispersion of operations, key suppliers.

-Auditor should understand the nature and formation of the entity when satisfying the planning requirement to understand the entity and its environment.

-To state qualifications of the entity's accounting personnel is the way to possess a level of knowledge of the entity's accounting principles and practices.

-To understand "something" doesn't mean doing substantive test







Notes

-The Objective of Section 70 (SSARS) is to prepare the financial statements in accordance with applicable financial reporting framework, no assurance and report are issued.

-The office of management and budget (OMB) has primary authority to develop requirements for performing federal program compliance audits in accordance with the Single Audit Act.

-GAO audits (Yellow Book Audit) do not required disclosure of all possibly fraudulent activities and non-compliance acts to the federal inspector general, but do require the auditor to document an understanding of internal control of the audited entities.

-Auditors only need to audit entities receiving 20% of federal financial support, and auditors must audit entities receiving 40% of federal financial support.

-When performing a review of interim financial information, testing of internal control is not required.

-Unlike audit engagement, for a compilation engagement, auditor is not required to make inquires or perform other procedure to verify, corroborate, or examine information supplied by the entity.

-Compilation doesn't require an understanding of internal control.

-Standards for consulting services (SSCS) and Statements on standards for tax services (SSTS)

-Accountant shouldn't perform compilation of financial statement if he/she doesn't understanding the services the client provides.

-Statements on standards for attestation engagement (SSAES): standards for agreed-upon procedures engagement, for example, express an opinion on square footage of a warehouse.

-In an review of interim financial info, accountants do not obtain corroborating external evidence, he/she review the minutes, calculate ratios, make inquire of accounting department's management, etc.

Thursday, June 13, 2019

Notes (Continued)

-Documentation of the inquiry and analytical procedure on a review engagement doesn't require documentation of communication with entity's legal counsel

-CPA can charge a client commission or contingent fee for IRS examination

-SEC rules are more restrictive

-Statements on Quality Control Standards (SQCS) provide quality control (QC) policies and procedures for performing engagement

-CPA will not discuss the audit procedure with the client

-PCAOB has adopted its own rules with respect to auditing standards, ethics and independence rules

-If an entity have spend more than $750,000 federal grant or reward a year, the entity must have a single audit

-The integrity of management is not important for an review.  Audit risk, obtaining an understanding of the entity's internal control is also not important for an review.

-Assessing the risk of material misstatement is not a review procedure

-Representation letter is not required for a compilation

-Inquiry procedure is not required for a compilation

-It's auditors' responsibility to make sure the financial statements comply with GAAS (generally accepted auditing standards)

Notes

-CPA's working paper is CPA's own property, is not required to give it to anyone.

-External auditor receive share of client's common stock has 30 days to sell or donate the stocks.

-Auditor will not provide assurance on internal control

-For small business, management integrity includes emphasizing ethical behavior through oral communication and management example

-CPA cannot disclose client's info without client's consent in responding to a letter from IRS

-Compilation report includes phase: "the objective of a compilation is to assist management in present financial statement in the form of financial statement".

-ARSCs (Accounting and Review Services Committee) issue statement on review and compilation engagement, not governing review and compilation engagement practice. In addition, the governing body is related to the unaudited financial statement, which is not required to file for the issuance of entities' securities

-A successor auditor is required to attempt communication with the predecessor auditor prior to accepting the engagement

-QC or procedure related to engagement supervision doesn't include hiring and advancement of engagement personnel

-Government Accountability Office (GAO) require external peer review every 3 years.

-According to PCAOB auditing standard 1215, the auditor should complete the final set of audit document with 45 days following the report release date

Wednesday, June 12, 2019

SSARS (Section 70)

SSARS (Section 70) applied to compilation and review, not other services, such as processing financial data or consulting on accounting matters.

Review attestation

Review attestation doesn't require testing of entities' internal control (IC)